ALLTEX WELDING SUPPLY

AUTHORIZED
30903 OLD WASHINGTON RD, WALLER, TX, 77484|(281) 381-0519

USDOT

2593713

MC Number

N/A

Fleet Size

15

Total Drivers

16

Last updated: March 16, 2026

Safety overview

ALLTEX WELDING SUPPLY is a small intrastate only (hazmat) motor carrier based in WALLER, Texas, operating 15 power units with 16 drivers. 1 of their 5 BASIC scores sits above the 75th percentile intervention threshold. The rest fall within acceptable ranges. Their driver out-of-service rate of 2.3% comes in under the 5.51% national average. No crashes on file. FMCSA records show 43 inspections for this carrier.

BASIC scores

SMS Percentiles

Higher percentile = worse performance relative to peers. Scores at or above 75% may trigger an FMCSA investigation.

Unsafe Driving
18%
HOS / Fatigue
20%
👤Driver Fitness
87%
Controlled Substances
24%
🔧Vehicle Maintenance
65%

Out-of-service rates vs. national average

An out-of-service order means the driver or vehicle was pulled from operation during a roadside inspection.

Driver OOS rate2.3%
National average5.5%
Vehicle OOS rate4.8%
National average20.7%

For reference, the average driver OOS rate in Texas is 13.3% and the average vehicle OOS rate is 29.7% across 174,809 carriers.

Company details

Entity Type
N/A
Carrier Operation
Intrastate Only (Hazmat)
Operation Classification
Exempt For Hire
Cargo Carried
N
Hazmat
Yes
Safety Rating Date
N/A

What are BASIC scores?

FMCSA tracks carrier performance through its Safety Measurement System (SMS), which scores carriers across six categories called BASICs. Each score is a percentile from 0 to 100, based on inspection and crash data from the past 24 months.

A score of 65 means the carrier performed worse than 65% of its peers. Anything above 75% can trigger FMCSA alerts or investigations. Brokers vetting new carriers should pay attention to scores above 50%.

Unsafe driving
Speeding, reckless driving, improper lane changes, seatbelt violations. All based on what officers find during roadside inspections.
HOS / Fatigue
Hours-of-service violations, logbook problems, driving past the allowed limits. Fatigued driving is one of the top causes of truck crashes in the US.
Driver fitness
Licensing problems, expired medical certificates, and other driver qualification issues.
Controlled substances
Drug and alcohol testing violations, possession, or impairment.
Vehicle maintenance
Brake problems, tire issues, lighting defects, load securement failures. Caught during the vehicle portion of roadside inspections.
Crash indicator
Based on crash history from state-reported data. Higher percentile means more crashes relative to the carrier's size and mileage.

Inspections

43

Total

51%

Driver %

Driver Inspections43
Vehicle Inspections42
Driver OOS Rate2.3%
Vehicle OOS Rate4.8%

Crash history

0

Total Crashes

Fatal Crashes0
Injury Crashes0
Tow Crashes0

Need trucking insurance?

Compare quotes from commercial truck insurers. Liability, cargo, physical damage coverage and more.

Get quotes (coming soon)

Frequently asked questions

Is ALLTEX WELDING SUPPLY authorized to operate?

Yes. ALLTEX WELDING SUPPLY (USDOT #2593713) currently holds "AUTHORIZED" status with FMCSA. They're registered as an intrastate only (hazmat) carrier.

What is ALLTEX WELDING SUPPLY's safety record?

ALLTEX WELDING SUPPLY has 1 BASIC score above the 75th percentile, which is where FMCSA may look into a carrier. Brokers should weigh these scores alongside the inspection history and crash data before making a decision.

How many trucks does ALLTEX WELDING SUPPLY operate?

ALLTEX WELDING SUPPLY operates 15 power units with 16 drivers on file. That makes them a small carrier.

Does ALLTEX WELDING SUPPLY transport hazardous materials?

Yes. ALLTEX WELDING SUPPLY is flagged for hazardous materials transportation with FMCSA. That means additional safety requirements and more frequent inspections.

Where is ALLTEX WELDING SUPPLY located?

ALLTEX WELDING SUPPLY is based in WALLER, Texas at 30903 OLD WASHINGTON RD, 77484. Phone: (281) 381-0519.

What are ALLTEX WELDING SUPPLY's out-of-service rates?

ALLTEX WELDING SUPPLY's driver out-of-service rate is 2.3%, compared to the national average of 5.51%. Below average, which is a good sign. Their vehicle out-of-service rate is 4.8% (national average: 20.72%). Below average, suggesting the fleet is well-maintained.